Get Connected Safely and Get Grilling Fast with Mighty Flame

Ready...

• Be sure the CYLINDER VALVE is completely CLOSED by turning the HANDWHEEL clockwise until tight. Be sure all appliance valves are turned OFF.

• Remove the GREEN CAP and recycle.

• Attach the appliance connector to the propane cylinder at POINT OF CONNECTION.  See illustration below.

Check...

• TO CHECK FOR LEAKS. Make a soapy solution of one capful liquid soap and one cup water. Stir to mix well.

• Using a clean paintbrush or sponge, apply the soapy solution to areas marked with a RED ARROW (See illustration below).

• Look for continuous bubbles at the RED ARROWS while slowly turning the HANDWHEEL counter-clockwise to the OPEN position.

• If continuous bubbles appear, a leak exists. CLOSE THE HANDWHEEL and contact a propane supplier to make needed repairs. 

GO!

• Light appliance following manufacturers instructions.

• When appliance is not in use, turn the HANDWHEEL on the propane cylinder clockwise to CLOSE.

• When your Mighty Flame propane cylinder is empty, pick up a fresh one at any Mighty Flame Cylinder Exchange location. 

• Find your nearest Mighty Flame location by clicking here.

Download our Safe Grilling Checklist